Ultra-high-speed, Next-generation Enterprise Wireless
PLANET WDAP-1750AC is an enterprise PoE access point with the latest 802.11ac wireless technology, advanced management features and superior encryption standard yet cost-effective. Meeting enterprise demand, the WDAP-1750AC has enhanced security and management features including multiple SSIDs, IEEE 802.1Q VLAN, WPA / WPA2-enterprise security, RADIUS MAC authentication and so forth. With the multiple reversed-polarity SMA male antenna connectors, the WDAP-1750AC is able to connect its suitable external antenna and booster in such wireless environments as warehouses, campuses and enterprises.

Extraordinary 11ac Dual Band Wireless Technology
The WDAP-1750AC supports IEEE 802.11a/b/g/n/ac dual band standards with 3T3R MIMO technology; therefore, it provides the wireless speed up to 450+1300Mbps, which is 24X faster than the 11a access point at 5GHz frequency and 8X faster than the 11g access point at 2.4GHz frequency. The incredible wireless speed makes it ideal for handling multiple HD movie streams, high-resolution on-line games, stereo music, VoIPs and data streams at the same time stably and smoothly.

11ac Innovations Bring Excellent Data Link Speed
The WDAP-1750AC has 3 detachable highly-sensitive antennas which provide stronger signal and excellent coverage even in the wide-ranging or bad environment. With adjustable transmit power option, the administrator can flexibly reduce or increase the output power for various environments, thus reducing interference to achieve maximum performance. To provide extremely high-speed user experience, the WDAP-1750AC adopts IEEE 802.11ac technology to extend the 802.11n 40MHz channel binding to 80MHz and the implementation of 256-QAM modulation where higher transmitting/receiving rates go up to 1300Mbps in 5GHz less interference frequency band. In addition, the WDAP-1750AC is equipped with Gigabit LAN port to eliminate the restriction of 100Mbps Fast Ethernet wired connection to let users fully enjoy the high speed provided by wireless. The IEEE 802.11ac also optimizes MU-MIMO (Multi-User MIMO) mechanism to serve multiple devices simultaneously.

Flexible Deployment with PoE Feature
Compliant with the IEEE 802.3at Power over Ethernet standard, the WDAP-1750AC can be powered and networked by a single UTP cable. It thus reduces the needs of extra cables and dedicated electrical outlets on the wall, ceiling or any other place where it is difficult to reach. The wireless network deployment becomes more flexible and worry-free from the power outlet locations. As it is a highly-reliable industrial wall-mount design, the WDAP-1750AC can be firmly installed on the wall conveniently.

Wireless Security Encryption and Wireless Value-added Features
In aspect of security, besides 64/128-bit WEP encryption, the WDAP-1750AC is integrated with WPA / WPA2, WPA-PSK / WPA2-PSK and 802.1x Radius authority to secure and protect your wireless LAN. It provides the wireless MAC filtering and SSID broadcast control to consolidate the wireless network security and prevent unauthorized wireless connection. Being an access point, the WDAP-1750AC supports the VLAN function to allow multiple SSIDs (32 sets of SSIDs) to access Internal VLAN topology. Moreover, its Wi-Fi Multimedia (WMM) mechanism provides enhanced QoS over wireless connection for better performance in multimedia transmission like on-line gaming and video streaming, which are classified as a top priority.

Multiple Operation Modes for Various Applications
The WDAP-1750AC supports AP, WDS Bridge, and Repeater modes, through which it provides more flexibility for users when wireless network is established. Compared with general wireless access point, the WDAP-1750AC offers more powerful and flexible capability for wireless clients.

Easy Installation and Management
With user-friendly Web UI, the WDAP-1750AC is easy to install, even for users who never experience setting up a wireless network. Furthermore, with SNMP-based management interface, the WDAP-1750AC is convenient to be managed and configured remotely in a small business wireless network.

Wall-mount Design Perfect for Room Installation
The WDAP-1750AC is adopted with the latest 802.11ac technology to provide extreme high-speed wireless experience for users. With the stylish wall-mount design, you don’t need to spend extra time and cost to deploy the wireless network. Its sleek and fashionable appearance adapted to the room can match any decor without affecting the original interior design. Furthermore, the WDAP-1750AC supports standard 802.3at PoE power scheme, effectively reducing the cabling cost. The WDAP-1750AC, with the SNMP supported, brings the most convenience to system administrators or machine operators. No expensive instruments or complex back-end subscriber managed systems are required for deployment.

Extreme High Speed and Dual Band Make Wi-Fi transmission More Powerful
The WDAP-1750AC delivers the dual band technology to avoid signal interference and ensure the best Wi-Fi performance. It allows you to check e-mail and surf the Internet via the 2.4GHz band and simultaneously watch high-definition (HD) video or any other multimedia application via 5GHz band. Moreover, the Gigabit Ethernet port of the WDAP-1750AC offers ultra-fast wired connections that utilize the maximum wireless bandwidth; therefore, users will have real wireless speed over 100Mbps. With outstanding stability of high-speed wireless transmission, the WDAP-1750AC can provide users with excellent experience in multimedia streaming with your mobile devices anywhere, anytime.

Secured and Managed Enterprise-class WLAN
With support for high-level encryption mechanism, the WDAP-1750AC can effectively prevent your information from eavesdropping by unauthorized users. Allowing multiple different SSIDs to be used simultaneously and cooperating with the VLAN support, the WDAP-1750AC helps network administrators define separate wireless subnets for various class-of-service and security policies.

Standard Compliant Hardware Interface

  • Complies with IEEE 802.11ac (draft 2.0) and IEEE 802.11a/b/g/n standards
  • 2 x 10/100/1000BASE-T port with PoE supporting 802.3at and 802.3af PSE (Power Sourcing Equipment)
  • IEEE standard 802.3af/at PoE design

RF Interface Characteristics

  • Features 2.4GHz (802.11b/g/n) and 5GHz (802.11a/n/ac) concurrent dual band for more efficiency of carrying high load traffic
  • 3T3R MIMO technology for enhanced throughput and coverage
  • Provides multiple adjustable transmit power control
  • High speed up to 1.75Gbps (450Mbps for 2.4GHz + 1300Mbps for 5GHz) wireless data rate

Comprehensive Wireless Advanced Features

  • Multiple Wireless Modes: AP,WDS PtP/ PtMP, and WDS Repeater
  • Supports up to 32 multiple-SSIDs (2.4GHz + 5GHz) to allow users to access different networks through a single AP
  • Supports VLAN function to limit the clients to access the specific internal network resource
  • Supports WMM (Wi-Fi Multimedia) and wireless QoS to enhance the efficiency of multimedia application
  • Supports wireless schedule to automatically enable or disable the wireless function based on predefined schedule

Secure Network Connection

  • Advanced security: 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK (TKIP/AES encryption) and 802.1x Radius Authentication
  • Supports MAC address filtering

Easy Installation & Management

  • Flexible deployment with standard 802.3at PoE/ PD supported
  • Web-based configuration of HTTP/HTTPS/SSH/CLI
  • SNMP-based management interface
  • System status monitoring includes DHCP Client and System Log
Hardware Specifications
Interfaces LAN 2 x 10/100/1000BASE-T RJ45 port
Auto-negotiation and auto MDI/MDI-X
Antennas Gain 3 x 2dBi SMA antenna
Reset Button Press over 5 seconds to reset the device to factory default
LED Indicators PWR
Allow LED to turn off via software control
Material Plastic
Dimensions (W x D x H) 182 x 182 x 30 mm
Weight 470g
Power Requirements DC Input: 12V DC, 4A
PoE Input: IEEE 802.3at PoE+, 48~56V DC in-line power
Power Consumption 20W (without PSE)
ESD Protection ±8kV air-gap discharge, ±4kV contact discharge
Mounting Wall mount / Desktop
Wireless Interface Specifications
Standard IEEE 802.11ac (draft 2.0) 5GHz
IEEE 802.11a/n 5GHz
IEEE 802.11b/g/n 2.4GHz
Operating Channels 2.4GHz America/ FCC: 1~11
Europe/ ETSI: 1~13
5GHz: America/ FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165
Europe/ ETSI: 36, 40, 44, 48
*5GHz channel list will vary in different countries according to their regulations.
Antenna Structure 802.11ac: 3T3R MU-MIMO
802.11n: 3T3R MIMO
Modulation DSSS
Data Modulation 802.11ac: OFDM (BPSK / QPSK / 16QAM / 64QAM / 256QAM)
802.11a/g/n: OFDM (BPSK / QPSK / 16QAM / 64QAM)
802.11b: DSSS (DBPSK / DQPSK / CCK)
Band Mode 2.4G / 5G concurrent mode
Frequency Range 2.4GHz: America/ FCC: 2.412~2.462GHz
Europe/ ETSI: 2.412~2.484GHz
5GHz: America/ FCC: 5.180~5.240GHz, 5.725~5.850GHz
Europe/ ETSI: 5.180~5.240GHz
Channel Width 802.11ac: 20/40/80MHz
802.11n: 20/40MHz
Transmission Distance 802.11ac (draft): up to 30m
802.11n: up to 70m
802.11g: up to 30m
The estimated transmission distance is based on the theory. The actual distance will vary in different environments.
Max. RF Power 5GHz:
802.11ac (VHT20/40/80): 27.5dBm @MCS0
802.11ac (VHT20/40/80): 22.5dBm @MCS7
802.11ac (VHT20/40/80): 19.5dBm @MCS9
802.11n (HT20/40): 27.5dBm @MCS0/MCS8
802.11n (HT20/40): 22.5dBm @MCS7/MCS15
802.11a: 26.5dBm @6Mbps
22.5dBm @54Mbps
802.11n (HT20/40): 27.5dBm @MCS0
802.11n (HT20/40): 22.5dBm @MCS7
802.11g: 27.5dBm @6Mbps
802.11g: 23.5dBm @54Mbps
802.11b: 27.5dBm @1Mbps
Receive Sensitivity 5GHz:
802.11ac (VHT20): -64dBm @MCS9
802.11ac (VHT40): -61dBm @MCS9
802.11ac (VHT80): -58dBm @MCS9
802.11n (HT20): -87dBm @MCS0, -67dBm @MCS7
802.11n (HT40): -84dBm @MCS0, -63dBm @MCS7
802.11a: -71dBm @54Mbps
802.11n (HT20/40): -87dBm @MCS0
802.11n (HT20/40): -67dBm @MCS7
802.11g: -70dBm @54Mbps
802.11b: -90dBm @1Mbps
Software Features
Wireless Mode ■ AP (Access Point)
■ Repeater (WDS + AP) 
■ WDS PTP (Point to Point)
■ WDS PTMP (Point to Multipoint)
Encryption Security ■ WEP (64/128-bit) encryption security
■ 802.1x Authenticator
Wireless Security Wireless MAC address filtering
Supports WPS (Wi-Fi Protected Setup)
Enable/ Disable SSID Broadcast
Wireless Advanced WMM (Wi-Fi Multimedia), Max. Associated Station Number
Multiple SSIDs: up to 16 at 2.4GHz and 16 at 5GHz
Wireless Isolation: Enable it to isolate each connected wireless client from communicating with each other
WLAN L2 isolation (AP mode)
Provides wireless statistics
Max. Clients Wired: 253
2.4GHz Wireless: 50
5GHz Wireless: 50
LAN Built-in DHCP server supporting static IP address distribution
Supports UPnP
Supports 802.1Q VLAN
System Management Web-based (HTTP) management interface
SNTP synchronization
Easy firmware upgrade
Supports scheduling reboot
Supports Smart Discovery Utility
Standards Conformance
IEEE Standards IEEE 802.11ac (draft 2.0, 3T3R, up to 1300Mbps)
IEEE 802.11n (3T3R, up to 450Mbps)
IEEE 802.11g
IEEE 802.11b
IEEE 802.11i
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
IEEE 802.3x Flow Control
Other Protocols and Standards CSMA/CA, CSMA/CD, TCP/IP, DHCP, ICMP, SNTP
Environment & Certification
Temperature Operating: 0 ~ 50 degrees C
Storage: -20 ~ 60 degrees C
Humidity Operating: 10 ~ 90% (non-condensing)
Storage: 5 ~ 90% (non-condensing)
Regulatory FCC, CE
Date Version Description Download
2014-12-09 1.0 WDAP-1750AC
Date Version Description Download
2015-08-14 1.3.2 New Functions:
1.Supports NMS
2.Supports schedule reboot
3.New Wi-Fi driver
Bug Fixed: Fixed WDS issue.
Quick Guide
Date Version Description Download
2014-10-30 1.0 Initial release.
User’s Manual
Date Version Description Download
2014-12-05 1.0 Initial release.
EC Declaration
Date Version Description Download
2014-12-12 1.0 EC Declaration
Ordering Information


1750Mbps 802.11ac Dual Band Wall Mount Wireless Access Point


There are no reviews yet.

Be the first to review “PTWDAP-1750AC”


You can be always up to date with our company news!

*Don’t worry, we won’t spam our customers mailboxes