PLANET FT-90x Web Smart Media Converter series supports conversion between 10/100Base-TX and 100Base-FX network. There are SC/SFP/WDM connectors and single-mode/multi-mode media for your needs. The Ethernet signal allows two types of segments to connect easily, efficiently and inexpensively. This converter can be used as a stand-alone unit or as a slide-in module to PLANET Media Converter Chassis (MC-700, MC-1500 and MC-1500R / MC-1500R48).

Each Web Smart converter is able to manage through the Web interface. The powerful Web Smart Media Converter supports flow control, QoS, bandwidth control and ingress/egress rate control, etc. The statistics functions of the Web Smart converter help administrators to remotely analyse and count the packet flow of the current Ethernet link. Management function helps reduce the amount of valuable time that a network administrator spends detecting and locating network problems, otherwise it requires visual inspection of cabling and equipment.

The Web Smart function also includes the LLR and Loop Back Test. LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. It provides more flexible settings for converters.

Fiber-optic Networking for ISPs, enterprises, and homes
With high performance of data transmission and easy installation, the FT-90x series can build an ISP network solution of FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs and FTTB (Fiber to the Building) for small office network environment from enterprises. The Web management helps network administrators to monitor and set up the converter, speed and duplex through Web browsers.

• One-channel media conversion between 10/100Base-TX and 100Base-FX
• Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX standard
• Auto-negotiation for 100Base-TX Half-duplex or 100Base-TX Full-duplex
• Supports auto MDI/MDI-X function on RJ-45 Port
• Compact size works with PLANET MC family Media Chassis (MC-700/1000R/1500)
• TS-1000 OAM
• Built-in IP-based Web interface for remote management
• Supports PLANET Discovery Utility for deploy management
• Layer 2 Smart Feature
– IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets
– Supports Maximum frame size to 2Kbytes.
– Store-and-Forward mechanism
– IEEE 802.1Q VLAN tagging
– Two levels of priority queue
– 802.1p QoS Scheme
– Bandwidth Control (Kbps) for both Ingress and Egress
– Broadcast Storm Control to optimize network bandwidth.
– Ethernet Statistics on both TP and Fiber interface
– Look Back Test Function (LBT) , Link Loss Return(LLR)
– Firmware upgrade via HTTP protocol
– SNMP Trap for alarm notification
• LED indicators for easy network diagnosing
• Reset Button at the front panel for resetting to factory default
• Choice of fiber-connector from SC, WDM, multi-mode / single-mode fiber /100Base SFP

Hardware Specifications
Standards IEEE 802.3, 10Base-T
IEEE 802.3u, 100Base-TX, 100Base-FX
IEEE 802.3x, Flow Control
IEEE 802.1p, Class of Service
Copper Port 1 x 10/100Base-TX RJ-45 port
Auto-negotiation, Auto-MDI/MDI-x
Optical Port 1 x 100Base-FX
Fiber Connector FT-902 : SC / Multi-mode / 2km
FT-902S15 : SC / Single Mode / 15km
FT-902S35 : SC / Single Mode / 35km
FT-902S50 : SC / Single Mode / 50km
FT-905A : SFP / Vary on transceiver module
FT-906A20: WDM SC / Single Mode / 20km
FT-906B20: WDM SC / Single Mode / 20km
Optic Wavelength FT-902: 1310nm
FT-902S15: 1310nm
FT-902S35: 1310nm
FT-902S50: 1310nm
FT-905A: Vary on transceiver module
FT-906A20: TX: 1310nm, RX: 1550nm
FT-906B20: TX: 1550nm, RX: 1310nm
Launch Power (dBm) Max. FT-902: -14
Launch Power (dBm) Min. FT-902: -20 (62.5/125µm), -23.5 (50/125µm)
FT-902S15: -20
FT-902S35: -15
Receive Sensitivity (dBm) FT-902: -31.8
FT-902S15: -32
FT-902S50: -35
Maximum Input power (dBm) FT-902: -14
FT-905A: NA
Speed-Twisted-pair 10/20Mbps for Half/Full-Duplex
100/200Mbps for Half/Full-Duplex
Speed-Fiber-optic 200Mbps for Full-Duplex
Cable-Twisted-pair 10Base-T: 2-pair UTP Cat. 3, 4, 5, up to 100 m
100Base-TX: 2-pair UTP Cat. 5, up to 100 m
Cable-Fiber-optic cable • 50/125µm or 62.5/125µm multi-mode fiber cable, up to 2km.
• 9/125µm single-mode cable, provides long distance for
15/20/35/50km or longer (very on SFP module)
LED Indicators PWR,
Fiber LINK/ACT, Fiber FDX
Power Consumption 5.5 Watts (maximum)
Power Input 5V/2A
Dimensions (W x D x H) 93 x 69 x 25 mm
Operating Environment Operating temperature: 0 to 50 degrees C
Humidity: 10~90% non-condensing
Storage Environment Storage temperature: -25 to 70 degrees C
Humidity: 10~90% non-condensing
Emission FCC Class A, CE Class B
Date Version Description Download
2014-05-09 1.0 FT-90x
Date Version Description Download
2008-05-11 V1.2 Firmware v1.2
2007-12-10 V1.1 Firmware v1.1
Quick Guide
Date Version Description Download
2016-05-09 2.0 Release for FT-905A hardware vereion 2.0.
User’s Manual
Date Version Description Download
2016-05-09 2.0 Release for FT-905A hardware vereion 2.0.
2007-01-30 1.0 Initial Release
EC Declaration
Date Version Description Download
2017-12-14 1.2 EC Declaration

Ordering Information


10/100Base-TX to 100Base-FX (SC, MM) Web Smart Media Converter -2km


10/100Base-TX to 100Base-FX (SC, SM) Web Smart Media Converter -15km


10/100Base-TX to 100Base-FX (SC, SM) Web Smart Media Converter -35km


10/100Base-TX to 100Base-FX (SC, SM) Web Smart Media Converter -50km


10/100Base-TX to 100Base-FX (SFP) Web Smart Media Converter -up to 60km


10/100Base-TX to 100Base-FX (WDM, SM, TX: 1310 RX: 1550) Web Smart Media Converter -20km


10/100Base-TX to 100Base-FX (WDM, SM, TX: 1550 RX: 1310) Web Smart Media Converter -20km


There are no reviews yet.

Be the first to review “PTFT-90x Series”


You can be always up to date with our company news!

*Don’t worry, we won’t spam our customers mailboxes